HGL-100/3 disconnect switch size Suitable for AC 50HZ, rated voltage 400V/690V, rated current 63A, 80A, 100A, It acts as an isolation in the low voltage circuit. It is made of flame retardant V0 grade PA66, Contact is copper T3.
High Electrical & Mechanical Endurance
3-poles
Rated thermal currents from 63A, 80A, 100A
Designed according to IEC/ EN 60974-3
Conventional current | 100A | |||||
Rated current In(A) | 63 | 80 | 100 | |||
Rated insulation voltage Ui (V) | ||||||
Dielectric strength (V) | ||||||
Rated surge-resistant voltage Uimp KV | ||||||
Rated working current | AC-21B | 63 | 80 | 100 | ||
380V | AC-22B | 63 | 80 | 100 | ||
AC-23B | 63 | 80 | 100 | |||
AC-21B | 63 | 80 | 100 | |||
660V | AC-22B | 63 | 80 | 100 | ||
AC-23B | 63 | 80 | 100 | |||
Rated short-time withstand current lcw (kA Rms) 0.1s/1s | 8 | 8 | 8 | |||
Rated breaking capability Icn (A Rms) AC23 380 V | 1000 | 1000 | 1000 | |||
Rated making capability Icm (A Rms)AC23 380V | 1250 | 1250 | 1250 | |||
Rated shortcurrent making capabilityIcm (kA peak value) | 13.6 | 13.6 | 13.6 | |||
Mechanical durability 380V | 1400 | 1400 | 1400 | |||
Electical curability 380V | 200 | 200 | 200 |
HGL-100 disconnector switch size, that is, when the position is divided, there is an insulation distance and an obvious disconnection mark between the contacts in accordance with the specified requirements; in the combined position, it can carry the current under the normal loop condition and the abnormal condition within the specified time ( Switching devices for currents such as short circuits.
The HGL disconnect switch is an important component in the low voltage circuit to ensure the safety of the operator.
http://www.grlbusbar.com/