DIN rail industrial powerline Ethernet bridge

1Gbps G.hn WD-1000M-GD(800V)

Brief introduction

DIN rail industrial PLC Ethernet bridge is a powerline telecommunication product

which being developed by WonderTek Technology (KunShan) Co.,LTD., it supports the G.hn protocol and the actual bandwidth up to 400Mbps. The product has been widely used in many aspects just as railway, mines, industrial telecommunication

and metro etc..

1.1 Highlight

1.1.1 Technical parameters

Support G.hn.

Industrial DIN rail style installation

Actual bandwidth up to 400Mbps

The maximum transfer distance up to 1000 meters

Self-adapt the rate

Compatible with all G.hn devices

One Domain Master can manage 15pcs End Point。

There can be 16 groups(16 different Domain Master) of PLC

telecommunication devices in the same power line circuit

1.1.2Manageability

Support Remote Firmware update(TR069)

802.3D Ethernet Bridge。

802.1Q VLAN。

Quality of Service(QoS) 。

IGMO(IPv4)Snooping &MLD(IPv6)Snooping

Support local web management

1.1.3Operating environment

Working temperature: -40℃-80℃。

Operating humidity: 10%-85% no condense

Storage humidity:5%-90% no condense

1.1.4Design standards

ITU-T G.9960

IEC 60529

IEC 50022

IEC 60068-2-6

MIL-STD-810G

Model	WD-1000M-GD
Interface	1*LAN 10/100/1000Base-TX self adaption RJ45，1*DC power interface MDI/MDX support
LED display light	Ethernet, PLC link ,power
Transfer band	25,50 and 100MHz and MIMO (based on G.9963)
Protocol（PHY)	IEEE802.3，IEEE802.3x, IEEE802.3u G.hn
Security	128-AES
Transfer rate（PHY）	800Mbps
Modulation	OFDM
Effective transfer rate	TCP/IP 400Mbps
Manageability	Remote Firmware update，support TR-069（optional）
	802.1D Ethernet Bridge
	802.1Q VLAN
	Quality of Service(QoS)
	IGMO(IPv4)Snooping & MLD(IPv6)Snooping
Working voltage	12V-800V
Operating temperature	-40℃-80℃
Size	67*160*123 (mm)（L×W×H）
Weight	0.30kg
Operating environment	Operating humidity:10%-85% (no condense)
	Storage humidity: 5%-90%(no condense)
Certification	FCC、CE class B,WEEE, RoHS

1.2Features

Packet loss：≤0.1%（100M,load70%）

Support 7*24 hours all weather operation

hardware watch dog function

PING≤2MS

The quantity of the group ≤16pcs

1.3Immunity of ESD

The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV

air discharge. Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each, Every time the discharge interval is 1 s, according to B/T 17626.2-2006.

1.4Immunity of electrical fast transient impulse group (Common mode)

The testing voltage which the device should be beared: between the power supply voltage port and ground: ±2.0kV, between signal circuit and ground: ±1.0kV, repetition frequency: 5KHz, test duration: 1 min/ time, testing times: Plus-n-Minus 5 times each. According to GB/T 17626.4-2008.

1.5Anti interference of surge impact

The testing voltage which the device should be beared: ±2kV, the interval of

continuous impulses: 1min/time. Test number: Plus-n-Minus 5 times each. According

to GB/T 17626.5-2008.(protection: all models protection and varistor series of

discharge tube type)

1.6Anti- vibration

Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration, maximum amplitude

7mm), interface with no loose, device with no Sealing off and drop in the test.

1.7System topology

COAX75ohm

100meter about 500Mbps

200meter about 400Mbps

300meter about 300Mbps

400meter about 150Mbps

500meter about 90Mbps

600meter about 50Mbps

800meter about 40Mbps

KUNSHAN WONDERTEK TECHNOLOGY CO.,LTD.

www.lechentek.com

Tel:0512-83670078

Fax:0512-55001422

Contact us

Contact Person:Tony Wang

Tel:+86-512-83670078

Mob:+8618796557601

E-mail:lechensales@vip.163.com

Web:www.kunshanwondertek.com